+44 (0) 1761 234 328

(0) items

£0.00

You have no items in your shopping cart.

VINT Hub Phidget

Product Code: HUB0000_0
Excl. VAT: £29.16 Incl. VAT: £34.99
  • Buy 5 for £26.37 (£31.64 incl. tax) each and save 10%
  • Buy 10 for £24.79 (£29.75 incl. tax) each and save 15%
  • Buy 25 for £23.26 (£27.91 incl. tax) each and save 21%
  • Buy 50 for £21.77 (£26.12 incl. tax) each and save 26%
You will earn 29 Robo Points for buying this product

With a VINT Hub Phidget, you can interface six devices to your computer through a single USB port. Each VINT port can perform one of four roles: Communicating with an intelligent VINT Device, reading a 0-5V Voltage or ratiometric sensor, acting as a digital output, or reading switches as a digital input. Each port has a power and ground pin, so you can also use the ports to gain access to the USB voltage supply directly.


Plug in one of our many VINT-enabled Phidgets that perform a wide variety of functions. Control motors and LEDs, measure temperature or motion, or build a large scale system with many inputs and outputs.

Easy to Use

VINT Devices are 'plug and program': automatically discovered by the Phidget API with the same ease of programming you've come to expect from Phidgets. Each VINT device has a full API with functions and events to make programming a snap.

Analog Sensor Compatible

Sometimes, you just need a few simple analog voltage sensors. Luckily, your collection of Phidget Analog Input sensors is not obsolete; each port on the USB VINT Hub can interface a 0-5V sensor. The VINT Port is backwards compatible with both ratiometric and non-ratiometric Phidget analog sensors.

Digital I/O Mode

In digital output mode, a VINT port can be used to drive LEDs, relays, digital circuits, and other simple electronics. Each port is PWM-enabled, allowing you to dim LEDs to a specific brightness.

Wire a switch or sensor contact directly into a VINT Port, and use the Digital Input mode to read the state of the switch.

If you need more than six inputs or outputs, you can expand by attaching a VINT I/O module. For example, there are VINT digital output modules with 16 outputs, allowing 96 digital outputs on a single VINT HUB Phidget

Documents

Library & Driver Downloads

Product Specifications

Board
Controlled By USB
Number of VINT Ports 6
Electrical Properties
USB Voltage Min 4.5 V DC
USB Voltage Max 5.3 V DC
USB Speed High Speed
Current Consumption Min 32.5 mA
Available External Current 470 mA
Voltage Inputs
Voltage Input Resolution * 16 bit
Sensor Input Impedance 324 kΩ
Input Voltage Min (DC) 0 V DC
Input Voltage Max (DC) 5 V DC
Voltage Input Noise ± 630 μV DC
Sampling Interval Max  60 s/sample
Number of Voltage Inputs 6 (Shared)
Sampling Interval Min 1 ms/sample
Voltage Noise 1.3 mV DC
Digital Inputs
Pull-up Resistance 124 kΩ
Low Voltage Max (True) 1 V DC
High Voltage Min (False) 1.8 V DC
Low Voltage Trigger Length Min 3 ms
High Voltage Trigger Length Min 3 ms
Digital Input Voltage Max 5.5 V DC
Digital Input Type Switch (Active Low)
Number of Digital Inputs 6 (Shared)
Digital Outputs
Series Resistance 510 Ω
Digital Output Available Current 8.1 mA
Digital Output Voltage Min 0 V DC
Digital Output Voltage Max 3.3 V DC
PWM Frequency Max 50 kHz
PWM Resolution 0.8 %
Number of Digital Outputs 6 (Shared)
Physical Properties
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

*Voltage measured with a 10-bit ADC, oversampled to 16-bits.

FeeFo Reviews

This product has no reviews yet.

Whenever possible, items which are in stock are dispatched the same day, or the next working day.

Large and/or heavy items are dispatched by UPS courier service and these orders must be placed before 15:00hrs (GMT) to ensure same day dispatch.

Small items are normally sent using a Royal Mail service for UK orders, and International Airmail or UPS for overseas orders

Returns Policy

VINT Hub Phidget
0
Post your comment

Active Robots