PhidgetInterfaceKit 0/16/16 1012_2 One of the most requested version of the interface kits.
- 16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC
- 16 Digital Outputs controlling up to 30VDC
- LED indicators on all I/O channels
Inputs are activated by 4 to 30 Volt signal. Outputs sink upto 30V at 2A. The outputs do not provide power they just act as switch to ground.
Comes with a 180cm USB Cable & mounting hardware kit.
The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide built-in filtering, to eliminate false triggering from electrical noise. They can be used to convey the state of on/off devices, such as push buttons, limit switches, relays.
The Digital Outputs can be used to directly control substantial devices, switching up to 30VDC at up to 2 Amps. The Output acts as a switch to ground, and is protected from transient voltages typical when switching inductive devices - relays, solenoids, motors. The Outputs can be used to directly control devices requiring substantial power such as incandescent lights, high power LEDs, relays, solenoids, motors.
- A 3018 - Mini-USB cable 1830cm
- A Hardware mounting kit (4 nuts and bolts, 4 plastic spacers)