1017_2

1017_2 Phidget USB Interface 0/0/8

£104.04

Control 8 DPDT mechanical relays, switching up to 250VAC/2amp or 200VDC/2amp.

Or
The PhidgetInterfaceKit 0/0/8 provides small signal relays with 8 relay outputs, rated at a combination of 250VAC, or 2 Amps, up to a maximum of 60 Watts. While typical mechanical relay boards are unable to switch signals due to an oxide buildup on the contacts, the 1017 excels at switching both signals and low-power applications.
 
Please Note:
These relays cannot be switched at maximum current and maximum voltage at the same time. Ensure that the total power of the load does not exceed the switching power of the relay. For example, you can switch these relays at 200V DC and 0.3 A (60W), or 30V DC and 2A (60W), but not 200V DC and 2A (400W).
 
Comes Packaged with
 
Hardware
 
Hardware mounting kit:
4x M3 Bolts (2cm Length)
4x Plastic spacers (5mm Length)
4x M3 Nuts

Board

Controlled By

USB

API Object Name

DigitalOutput

Current Consumption Min

14 mA

Current Consumption Max

300 mA

USB Speed

Low Speed

Physical Properties

API Object Name

InterfaceKit

Switch Type

DPDT

Recommended Wire Size

12 - 24 AWG

Switching Speed Max

20 cpm

Operating Temperature Min

0 °C

Operating Temperature Max

70 °C

Electrical Properties

Dielectric Strength

1.5 kV AC

Contact Resistance Max

50 mΩ

Load Voltage Max (DC)

* 120 V DC

Load Voltage Max (AC)

250 V AC

Load Current Min

10 μA

Load Current Max (DC)

2 A

Load Current Max (AC)

2 A

Turn-on Time Max

18 ms

Turn-off Time Max

18 ms

Switching Power Max (Real)

60 W

Switching Power Max (Apparent)

125 VA

Current Consumption Min

14 mA

Current Consumption Max

300 mA

* This specification applies to the version of 1017_1 with black relays on it. If your 1017_1 has orange relays, the DC switching voltage is 200VDC.