Servo Motors

We stock a full range of quality servos so if your looking for the latest Mightly Micro, or a Hitec Continuous Rotation Robot servo then you are sure to find something in your price range.

SpringRC Standard Continuous Rotation Servo

Product Code: 3211

The 3211 is a standard servo that has been built by SpringRC specifically for continuous rotation (up to 56 RPM at 4.8 V), and it produces a fair amount of torque (3.3 kg-cm at 4.8 V).

It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.
Read More

Excl. VAT: £9.35 Incl. VAT: £11.22
SpringRC High Torque Continuos Rotation Servo

Product Code: 3212

The 3212 is a standard servo that has been built by SpringRC specifically for continuous rotation (up to 60 RPM at 4.8 V), and it produces a lot of torque (13 kg-cm at 4.8 V).

It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. Essentially, it is a gear motor that can be controlled by an RC servo controller. It is not normally used as an actuator, as there is no way of commanding it to move to a particular position, as a standard RC servo does.
Read More

Excl. VAT: £15.20 Incl. VAT: £18.24

Futaba Servo Output Template

Product Code: P-SO-TEMP01

This innovative product enables the accurate drilling of holes in larger servo output discs and arms, now widely used in many large/3D models.

Covering a range from 12.5mm to 15.0mm hole centres, the horn template has brass drill guides moulded in during manufacture.

12.5~15.0" servo output template
Read More

Excl. VAT: £6.00 Incl. VAT: £7.20
Nubotics WC-132 Wheel Commander

Product Code: R279-WC-132

The WheelCommander™ controller takes the burden of complex feedback control firmware off of the main robot controller.

It provides powerful closed-loop control of two wheeled robots using simple RS-232 or I2C interface commands.
Read More

Excl. VAT: £65.41 Incl. VAT: £78.49

Nubotics WW-01 WheelWatcher Encoder

Product Code: R238-WW01-KIT

This WW-01 WheelWatcher Encoder Kit by Nubotics includes parts to assemble two incremental quadrature encoder systems that attach to standard RC servos.
Read More

Regular Price: £40.93

Special Offer: £27.60 £23.00 (excluding VAT)
CS-040 Wheel Spacer

Product Code: R256

The CS-040 is a codewheel mounting system for WheelWatcher CW-32 codewheel stickers used with the WW-01, WW-11, WW-02, and WW-12 WheelWatcher encoders.

It allows you to use the codewheel sticker on a variety of wheels or any mechanism that attaches to a servo with a servo control horn. Some drilling on your part is required, but the predrilled guide holes make it simple.
Read More

Excl. VAT: £1.60 Incl. VAT: £1.92